Mr.Thunderdeer 

Julie Q.

My monster's name is Mr. Thunderdeer. First, draw an upside-down triangle. Each side should be measured 6 ' inches. On the outside of the triangle, at the top, draw two rectangles that connect to the triangle. For each rectangle, two sides should be 1 ' inches tall and two sides ' inch wide. The rectangles should be 2 inches apart from each other. Draw a look-a-like electricity going through a wire. This 'electricity' should be 1 inch above the triangle and connected to the two rectangles. At each end of the look-a-like electricity, there should be two dots. 





Next, draw a hexagon ' inch from the top of the triangle and also in the middle of the triangle. Make sure the hexagon is inside of the triangle, and the hexagon's flat side should be facing the triangle's top flat side. Each side of the hexagon should be 3 ' cm. Inside of the hexagon, draw a circle 4 cm in diameter. Overlapping the circle, draw a 2 inch equilateral triangle. The tip of the triangle should be facing up and should also be in the middle of the inside of the hexagon. From the bottom of the hexagon, leave a ' cm space, and draw a 2 cm hexagon. The flat side of the small hexagon should be facing the bottom flat side of the big hexagon. Then draw a 1 inch horizontal line ' cm from the flat bottom side of the small hexagon. You should end up with a 1 inch small equilateral triangle. Now put two dots in the small triangle. They should be ' cm horizontal from each other. 





Now, color the biggest triangle blue. Color the two rectangles pink. Color the look-a-like electricity going through wire yellow and the two dots at the end black. Color the second biggest triangle yellow. Color what's left of the circle green. Color the big hexagon orange. Color the smallest hexagon red. Color the smallest triangle purple. Color the dots in the triangle black. 





Finally''''. you have just completed Mr. Thunderdeer.











Written by Julie Q


6th grade